SOCIALS 

SUBSCRIBE 

 Please subscribe.   So, you will get notification of the latest exciting posts. 

© 2023 by FEEDs & GRIDs. Proudly created with Wix.com

ABOUT FEEDs & GRIDs

My name is Mike.   This blog is made especially for you to enter my technology universe.  You will find new ideas and skills that may be helpful to you.   Feel free to leave your comments.   I am excited to hear from you.  Thank you. 

HOW TO BE AN AMAZING DESIGNER

Creative Engineering

See past articles by month selection.

April 28, 2018

Project Goals

  • Create a sophisticated embedded system that can monitor a plant's environment such as soil moisture, lighting level, temperature and humidity.

  • Display the sensor readings on a mini OLED display for users to review.

  • Intelligently enable the la...

April 16, 2018

Project Goals

  • Learn how to configure and use the PMOD ports on the 3.3V S7G2 based Avnet IOT Gateway board.  There are 6 PMOD ports available for many different kinds of configurations supported by Digilent Inc for expanding the functions of the board for your IoT a...

March 2, 2018

Project Goals

  • Learn to connect a popular 4 channels ADC Module to the 3.3V S5D9 IOT board.

  • Examples show how to connect it to either grove A (r_sci_i2c port) or B (r_iic port).

  • Examples show either configuration with and without using framework.

Project...

February 22, 2018

Project Goals

  • Learn to connect the 5V popular distance sensor to the 3.3V S5D9 IOT board.

  • Use one shot timer to generate the trigger pulse to start sensing.

  • Use timer and input interrupt to measure the return echo pulse from the sensor.

Diagram 1: Connec...

February 18, 2018

Project Goals

  • Based on what is developed from Part 1 and Part 2.

  • Show how to use the powerful real time OS ThreadX to manage the run time for temperature reading and display update.    The benefits of using ThreadX are removal of the complex and error-prone mai...

February 5, 2018

Project Goals

  • Learn to configure ports for GPIO, PWM, ADC, QPI Flash.

  • Learn to generate the drivers for Timer, Input Interrupt, ADC, Watch Dog Timer, QPI Flash read/write

  • How to set up the hardware for testing.

Board

Renesas S5D9 IoT Fast Prototyping Kit

S...

February 2, 2018

Project Goals

  • Learn to configure port for popular bus standards.

  • Learn to generate both driver and framework versions. 

    • The driver version can work without ThreadX RTOS.

    • The framework version is suitable for applications that require ThreadX RTO...

December 14, 2017

Project Goals

  • Take what is developed from Part 1.   

  • Add an external SHT31 sensor. (new hardware) 

  • Change the code to read the current temperature (F) from an external SHT31 sensor instead of an onboard AMS EN210 sensor. (software change)

  • Add the...

November 21, 2017

Project Description:

This is the follow up Arduino project that built on the first version.    Because the 433Mhz RF chip has short range issue and the data is frequently dropped,  this project is to choose a better reliable radio frequency module to replace it.    2.4G...

November 10, 2017

Project Goals

  • Develop the basic C code from scratch for the S5D9 board

    • Read the current temperature (F) from onboard AMS EN210 sensor (I2C interface).

    • Display the current temperature (F) on OLED display (I2C interface).

    • Display the...

Please reload

Please reload

Categories:

Tags:

Please reload

 

Categories:

This site was designed with the
.com
website builder. Create your website today.
Start Now